User Guide/Project/Calibration: Difference between revisions
From STX Wiki
< User Guide | Project
Jump to navigationJump to search
m (1 revision: Initial import) |
No edit summary |
||
| Line 1: | Line 1: | ||
{{DISPLAYTITLE:{{SUBPAGENAME}}}} | {{DISPLAYTITLE:{{SUBPAGENAME}}}} | ||
{{UG_Project}} | |||
A calibrated signal has a known pitch and amplitude in reference to an agreed standard. In general, when signals are recorded, and the absolute pitch and amplitude is of importance, they are recorded with a calibration signal (e.g. a 20 second sine wave at 1000Hz and 96dBSPL). | |||
{{STX}} supports calibration ... | |||
[[Category:TODO]] | |||
Revision as of 14:59, 14 September 2015
A calibrated signal has a known pitch and amplitude in reference to an agreed standard. In general, when signals are recorded, and the absolute pitch and amplitude is of importance, they are recorded with a calibration signal (e.g. a 20 second sine wave at 1000Hz and 96dBSPL).
STx supports calibration ...
