User Guide/Project/Sequence: Difference between revisions
m (Jw moved page User Guide/Projects/Sequence to User Guide/Project/Sequence) |
No edit summary |
||
| Line 10: | Line 10: | ||
Note: If you change the order of the signals, segments of the sequence are not adjusted and therefore could address the wrong positions.See the Workspace Special > Sequence for special sequence functions. | Note: If you change the order of the signals, segments of the sequence are not adjusted and therefore could address the wrong positions.See the Workspace Special > Sequence for special sequence functions. | ||
===Supplement #02: Sequencer and Sound Synthesis=== | |||
[[Media:Stx_sequencer.pdf|This PDF]] describes steps to create and use sequences. | |||
Latest revision as of 11:38, 10 April 2019
A sequence is a sequence of sound streams. These streams can be segments of sound files in the project, generated signals, or both. Signals in a sequence can be consecutive and parallel. Sequences can be treated just like sound files in STx (i.e. they can be analysed, segmented and have their parameters extracted). Sequences can also be used to implement simple signal processing tasks like mixing, filtering etc.
XML Tag: ASequence
Sequence Order
The Detail View signal shows which signals are currently in the sequence. You can change the order of the signals by selecting one, holding down the control key and using the arrow keys to move the signal up and down.
Note: If you change the order of the signals, segments of the sequence are not adjusted and therefore could address the wrong positions.See the Workspace Special > Sequence for special sequence functions.
Supplement #02: Sequencer and Sound Synthesis
This PDF describes steps to create and use sequences.
