User Guide/Tutorials/Analysing a sound file: Difference between revisions

Revision as of 08:59, 30 September 2019

The basic steps needed to analyse a sound file in STx in the extended workspace mode are as follows:

Select the sound file or segment you wish to analyse.
Select the desired analysis profile from the Signal Analysis & Display branch of the Application & Setup Tree tree.
Press the run button

Assuming that we want to display a spectrogram of the Samples1.wav we will do the following:

Select a Spectrogram & Parameters Viewer profile from the Application & Setup Tree tree. We will use the FFT_22Hz profile, which is preconfigured to display a spectrogram and waveform of the selected signal using a

Taking the example sound file Samples1.wav from the sample project, we will analyse it using the FFT_22HZ Spectrogram & Parameters Viewer profile.

@@ Line 1: / Line 1: @@
 {{DISPLAYTITLE:{{SUBPAGENAME}}}}
 {{UG_Tutorial}}
-The basic steps needed to analyse a sound file in {{STX}} are as follows:
+==Extended Workspace Mode==
+The basic steps needed to analyse a sound file in {{STX}} in the [[User_Guide/Workspace#Compact_and_Extended_Mode|extended workspace mode]] are as follows:
 *Select the sound file or segment you wish to analyse.
-*Select the desired analysis profile from the Signal Analysis & Display branch of the Application & Setup Tree tree.
+*Select the desired analysis profile from the Signal Analysis & Display branch of the [[User_Guide/Workspace/Application_and_Setup_Tree|Application & Setup Tree tree]].
 *Press the run button [[File:resource_run.png]]