Setup Dialog

The setup dialog for the Recorder application. This dialog is reached by pressing the setup button in the Recorder.

sampling rate

The rate at which to sample the signal in Hz.

channels

Mono or Stereo.

file code

The wave file format. Microsoft specifies the formats PCM8 and PCM16. However, it is possible to store the samples in 24, 32 and float format. Note that these non-microsoft standard formats are not supported by all other applications.

record code

The bit depth to record at. A translation between record code and file code is carried out if necessary.

max. duration

The maximum duration of the recording. You can then leave the recorder running and come back later.

i/o buffers

The number and length of buffers to use for recording.

auto preview

The default settings for the graph display once recording has finished.

method

Method for calculating the PPM values.

time constant

The hold time for the sample-hold method.

display time

The duration to display on the time (x) axis in the graph.

display range

The range in dB to display in the graph.

sort listing

Sort the tag list in ascending or descending order.

show PPM bars

Check to show the PPM bars in the Recorder.

show PPM graph

Check to show the PPM graph in the Recorder.

run / end RT Analyser automatically

Check to run the Real-Time Analyser parallel to the Recorder.

Signal I/O Setup

Click to modify the global Signal Input/Output Settings. Only MME devices are supported.

Auto Segment Name

Click to modify the global Automatic Segment Name settings.

Temp =

Click to set the directory for temporary wave files.

color scheme

Click to set the color scheme for the PPM graph.

Save / Cancel

Save the settings or cancel changes.

Microsoft Wave Specification: The Microsoft wave specification only supports the following settings: Bit Depth: 8, 16 Channels: mono, stereo Sampling Rate: 11025, 22050 and 44100 Other sampling rates and bit-depths are supported by many programs and soundcards.For users interested in recording more than two channels, please utilize the script nrecord.sts included in the Scripts directory in the STx installation directory.