User Guide/SPExL/Transcription Script/Settings

From STX Wiki
Jump to navigationJump to search

Spexl settings.png

Waveform Display

grid
Display a grid in the waveform display.
cursor
Change the default cursor style.
auto-scale
If checked, the y-axis waveform range is calculated automatically. If it is not checked, then the values range and usage are used.
range
A value between 0 and 100. A value of 100 sets the maximum y range to the maximum possible amplitude. This value is ignored if auto-scale is turned on.
usage
A value between 0 and 100. The percentage of the window height to use for the waveform display.
draw envelope
If checked, draw the envelope of the wave form, otherwise, use a solid fill.
line
Specify the waveform color.
show following attributes (blank separated)
Specify which attributes to display in the segments. The default is the segment ID.

Segment Display and Control

Spectrogram Display and Parameter Setup

frame
The analysis frame length in milliseconds
overlap
The frame overlap in percent.
use
There are two frame/overlap settings. Specify which one to use for display. You can toggle between them in SPExL using the frm= combobox.

Segment and Transcription Table

Scroll Bar

General

Retrieved from "https://mediawiki.kfs.oeaw.ac.at/stx/docs/wiki/index.php?title=User_Guide/SPExL/Transcription_Script/Settings&oldid=9446"

Navigation menu

Personal tools